FixVault
Home › Pontiac › 2005 › G6 Base › Repair and Diagnosis (Single Page) › Body & Frame › Door Locks › Theft Deterrent System › Repair Instructions › Theft Deterrent Control Module Replacement › Installation Procedure

Installation Procedure

    Fig 1: Removing Theft Deterrent Control Module
    GM1207719Courtesy of GENERAL MOTORS CORP.
  1. Install the theft deterrent control module.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Tighten the theft deterrent control module screws.

    Tighten:  Tighten the screws to 5 N.m (44 lb in).

  3. Install the ignition switch. Refer to Ignition Switch Replacement in Instrument Panel, Gages and Console.
  4. Perform the vehicle theft deterrent system learn procedure. Refer to Programming Theft Deterrent System Components .
  5. Program the theft deterrent control module after replacement. Refer to Control Module References in Computer/Integrating Systems.
About FixVault