Removal Procedure
- Remove battery tray assembly assembly. Refer to Battery Tray Replacement in Engine Electrical.
- Disconnect the shift cable from the PNP switch.
- Remove the shift cable bracket.
- Remove the PNP switch lever nut and lever.
- Remove the PNP switch. Refer to Park/Neutral Position (PNP) Switch Replacement .
- Remove the transmission upper side cover bolts.
- Install the engine support fixture. Refer to Engine Support Fixture in Engine Mechanical.
- Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
- Remove the left front tire and wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
- Remove the left lower control arm. Refer to Lower Control Arm Replacement in Front Suspension.
- Remove the wheel drive shaft from the transmission. Refer to Wheel Drive Shaft Replacement in Wheel Drive Shafts.
- Disconnect the steering rack intermediate shaft. Refer to Power Steering Gear Replacement in Power Steering System.
- Remove the frame. Refer to Frame Replacement (W/LX9) in Frame and Underbody.
- On vehicles equipped with the L61 engine, remove the transmission mount. Refer to Transmission Mount Replacement - Side .
- Lower the vehicle.
- Lower the LH side of the engine with the engine support fixture to allow the transmission side cover enough room to get past the left rail.
- Raise the vehicle.
- Remove the transmission side cover lower bolts.
- Remove the transmission side cover.