Installation Procedure

Fig 1: Removing Transaxle Mount-To-Transaxle Attachment Bolts

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the transaxle mount into the vehicle and tighten the bolts.
Tighten: Tighten the transaxle mount bolts to 90 N.m (66 lb ft).

Fig 2: View Of Front Transmission Mount Through Bolt

Courtesy of GENERAL MOTORS CORP.

Install the transaxle mount through bolt.
Tighten: Tighten the transaxle mount through bolt to 90 N.m (66 lb ft).
Lower the vehicle.