FixVault
Home › Pontiac › 2005 › GTO Standard › Repair and Diagnosis › External Pages › Different car › Section 5 (Lighting Systems) › Repair Instructions › Hazard Lamp Flasher Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing & Installing Front Fog Lamp Switch
    GM1236554Courtesy of GENERAL MOTORS CORP.
  1. Install the switch (1) into the opening.
  2. Press on the switch (1) assembly until fully seated.
  3. Install the I/P trim panel. Refer to Trim Panel Replacement - Instrument Panel (I/P) Center .
About FixVault