FixVault
Home › Pontiac › 2005 › GTO Standard › Repair and Diagnosis › External Pages › Different car › Section 5 (Lighting Systems) › Repair Instructions › High Mounted Stop Lamp Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Disconnecting Electrical Connector & Removing Center High Mounted Stop Lamp
    GM893689Courtesy of GENERAL MOTORS CORP.
  1. Position the center high-mounted stop lamp to the roof reinforcement.
  2. Install the center high-mounted stop lamp by pressing into place until fully seated.
  3. Connect the electrical connector to the high-mounted stop lamp.
    4. Fig 2: Removing & Installing Center High Mounted Stop Lamp Cover
    GM893684Courtesy of GENERAL MOTORS CORP.
  4. Install new bulbs, if required.
  5. Position the cover tabs to the slots.
  6. Install the cover pressing into place until fully seated.
About FixVault