Removal Procedure
WARNING: This page is about a different car, the 2005 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the windshield upper garnish molding. Refer to WINDSHIELD UPPER GARNISH MOLDING REPLACEMENT in Interior Trim.
- Disengage the retaining clips from the windshield bracket by grasping the antenna assembly at the windshield and sliding the assembly towards the passenger side of the vehicle.
- Lower the antenna coaxial cable from the windshield header.
- Disconnect the coaxial leads from the antenna base, and remove the antenna from the vehicle.