FixVault
Home › Pontiac › 2005 › Grand Am SC/T › Repair and Diagnosis (Single Page) › Accessories & Equipment › Communication Devices › Computer/Integrating Systems › Repair Instructions › Body Control Module Replacement › Installation Procedure

Installation Procedure

    Fig 1: View of BCM
    GM291492Courtesy of GENERAL MOTORS CORP.
  1. Connect the BCM connectors to the BCM.
  2. Install the BCM (2) to the bracket.
  3. Program the BCM. Refer to Body Control Module (BCM) Programming/RPO Configuration .
  4. Install the right insulator panels. Refer to Closeout/Insulator Panel Replacement - Right (Outboard) or Closeout/Insulator Panel Replacement - Right (Inboard) in Instrument Panel, Gages, and Console
About FixVault