FixVault
Home › Pontiac › 2005 › Grand Am SC/T › Repair and Diagnosis (Single Page) › Accessories & Equipment › Communication Devices › Computer/Integrating Systems › Repair Instructions › Body Control Module Replacement › Removal Procedure

Removal Procedure

  1. Turn the ignition switch to the OFF position.
    2. Fig 1: View of BCM
    GM291492Courtesy of GENERAL MOTORS CORP.
  2. Remove the right insulator panels. Refer to Closeout/Insulator Panel Replacement - Right (Outboard) or Closeout/Insulator Panel Replacement - Right (Inboard) in Instrument Panel, Gages, and Console.
  3. Slide the body control module (BCM) from the bracket.
  4. Disconnect the BCM connectors from the BCM.
  5. Remove the BCM (2).
About FixVault