FixVault

Installation Procedure

    Fig 1: Removing Lower Window Channel Retainer
    GM738933Courtesy of GENERAL MOTORS CORP.
  1. Position the rear run channel (1) in the front door.
  2. Lift up the rear channel to install the top clip.
  3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the window rear channel bolt (2).

    Tighten:  Tighten the front door window rear run channel bolt 6 N.m (53 lb in).

  5. Install the reveal molding.
  6. Install the front door window. Refer to Window Replacement - Front Door .
  7. Install the front door water deflector. Refer to Water Deflector Replacement - Front Door .
  8. Install the front door trim panel. Refer to Trim Panel Replacement - Side Front Door .