FixVault
Home › Pontiac › 2005 › Grand Am SC/T › Repair and Diagnosis › Engine Performance › System › Engine Controls - 3.4L - Introduction › Repair Instructions › Air Cleaner Element Replacement › Removal Procedure

Removal Procedure

  1. Turn OFF the ignition.
  2. Remove the air cleaner element retaining screws and remove the cover.
    3. Fig 1: Air Cleaner Element Components
    GM537321Courtesy of GENERAL MOTORS CORP.
  3. Remove the air cleaner element. Inspect the air cleaner element and replace if necessary.
  4. Disconnect the mass air flow (MAF) sensor electrical connector.
  5. Disconnect the IAT sensor electrical connector.
  6. Disconnect the breather tube from the air intake duct.
  7. Loosen the two air intake duct clamps and remove the air intake duct.
About FixVault