FixVault
Home › Pontiac › 2005 › Grand Am SC/T › Repair and Diagnosis › Engine Performance › System › Engine Controls - 3.4L - Introduction › Repair Instructions › Air Cleaner Intake Duct Replacement › Removal Procedure

Removal Procedure

    Fig 1: Identifying Air Intake Duct
    GM69062Courtesy of GENERAL MOTORS CORP.
  1. Loosen the 2 intake air duct clamps from the air cleaner assembly and throttle body.
  2. Disconnect the intake air temperature (IAT) sensor electrical connector.
  3. Remove intake air duct/mass air flow (MAF) sensor from air cleaner assembly and throttle body.
  4. Loosen the clamp on the MAF sensor and separate the intake air duct from the MAF sensor.
About FixVault