FixVault
Home › Pontiac › 2005 › Grand Am SC/T › Repair and Diagnosis › External Pages › Different variant/trim › Section 1 (Engine Controls - 2.2L - Introduction) › Repair Instructions › Accelerator Controls Cable Bracket Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Identifying Cruise Control Cable
    GM782238Courtesy of GENERAL MOTORS CORP.
  1. Remove the air cleaner outlet resonator. Refer to Air Cleaner Outlet Resonator Replacement .
  2. Disconnect the cruise control cable (2) from the throttle body (3) and the accelerator bracket (1).
    3. Fig 2: Control Cable Bracket View
    GM782246Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the accelerator control cable (3) from the throttle body (4) and accelerator bracket (1).
    4. Fig 3: View Of Accelerator Bracket
    GM782231Courtesy of GENERAL MOTORS CORP.
  4. Remove the 2 accelerator bracket nuts (3).
  5. Remove the accelerator bracket (2) from the throttle body (1).
About FixVault