FixVault
Home › Pontiac › 2005 › Grand Prix Base › Repair and Diagnosis › Electrical › Instrument Panel System Displays, Gauges And Console › Repair Instructions › Driver Information Center Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of Driver Information Display
    GM1203190Courtesy of GENERAL MOTORS CORP.
  1. Place the driver information display on the I/P accessory trim plate.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the driver information display screws.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

    3. Fig 2: Electrical Connector & Driver Information Display
    GM928828Courtesy of GENERAL MOTORS CORP.
  3. Connect the electrical connector to the driver information display.
    4. Fig 3: View Of I/P Accessory Trim Plate
    GM928809Courtesy of GENERAL MOTORS CORP.
  4. Press the I/P accessory trim plate to the I/P.
    5. Fig 4: Identifying Ignition Cylinder Bezel
    GM910510Courtesy of GENERAL MOTORS CORP.
  5. Install the ignition switch bezel.
About FixVault