FixVault
Home › Pontiac › 2005 › Grand Prix Base › Repair and Diagnosis › Engine Performance › System › Engine Controls - 3.8L - Introduction › Repair Instructions › Bypass Valve Actuator Replacement › Removal Procedure

Removal Procedure

    Fig 1: View Of Boost Control Solenoid
    GM911076Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement (L26) or Fuel Injector Sight Shield Replacement (L32) in Engine Mechanical - 3.8L.
  2. Remove the boost control solenoid (4). Refer to Boost Control Solenoid Replacement .
  3. Remove the vacuum hose from the bypass valve actuator (2).
  4. Remove the bypass valve actuator mounting bolts and rotate the bypass valve actuator until the rod disengages the lever.
About FixVault