FixVault
Home › Pontiac › 2005 › Grand Prix Base › Repair and Diagnosis › Engine Performance › System › Engine Controls - 3.8L - Introduction › Repair Instructions › Ignition Coil(s) Replacement › Removal Procedure

Removal Procedure

  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure (RPOs L26/L32) or Battery Negative Cable Disconnect/Connect Procedure (RPO LS4) in Engine Electrical.
  2. Disconnect the spark plug wires from the ignition coil.
    3. Fig 1: View Of Ignition Coil Module And Module Mounting Bracket
    GM12299Courtesy of GENERAL MOTORS CORP.
  3. Remove the ignition coil screws (1).
  4. Remove the ignition coil (2).
About FixVault