FixVault
Home › Pontiac › 2005 › Grand Prix GTP › Repair and Diagnosis › Engine Performance › System › Engine Controls - 3.8L - Introduction › Repair Instructions › Manifold Absolute Pressure (MAP) Sensor Replacement (L32) › Removal Procedure

Removal Procedure

    Fig 1: Removing/Installing MAP & BARO Sensors Retaining Clips
    GM1210599Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement (L26) or Fuel Injector Sight Shield Replacement (L32) in Engine Mechanical - 3.8L.
  2. Disconnect the MAP sensor electrical connector and the vacuum hose.
  3. Remove the manifold absolute pressure (MAP) sensor retainer.
  4. Remove the MAP sensor.
About FixVault