FixVault
Home › Pontiac › 2005 › Grand Prix GXP › Repair and Diagnosis › Engine Performance › System › Engine Controls - 5.3L - Introduction › Repair Instructions › Camshaft Position (CMP) Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: Camshaft Position (CMP) Sensor Electrical Connector
    GM1554556Courtesy of GENERAL MOTORS CORP.
  1. Remove the wheelhouse panel. Refer to Front Fender Liner Replacement .
  2. Disconnect the camshaft position (CMP) sensor electrical connector.
    3. Fig 2: View Of Crankshaft Oil Seal & Camshaft Position (CMP) Sensor
    GM1411952Courtesy of GENERAL MOTORS CORP.
  3. Remove the CMP sensor bolt (705).
  4. Remove the CMP sensor (703).
  5. Inspect the CMP sensor O-ring seal (704) for cuts or damage. If the seal is not cut or damaged, it may be reused.
  6. Remove the CMP sensor O-ring seal (704), if necessary.
About FixVault