FixVault
Home › Pontiac › 2005 › Grand Prix GXP › Repair and Diagnosis › Engine Performance › System › Engine Controls - 5.3L - Introduction › Repair Instructions › Crankshaft Position (CKP) Sensor Replacement › Removal Procedure

Removal Procedure

CAUTION: Refer to Vehicle Lifting Caution in Cautions and Notices.
    Fig 1: Crankshaft Position (CKP) Sensor Electrical Connector
    GM1554552Courtesy of GENERAL MOTORS CORP.
  1. Remove the right exhaust manifold. Refer to Exhaust Manifold Replacement - Right (RPOs L26/L32) or Exhaust Manifold Replacement - Right (RPO LS4) .
  2. Disconnect the crankshaft position (CKP) sensor electrical connector (1).
    3. Fig 2: View Of CKP Sensor & Bolt
    GM55322Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Clean the area around the CKP before removal in order to avoid debris from entering the engine.
  3. Remove the CKP sensor bolt.
  4. Remove the CKP sensor.
About FixVault