Installation Procedure

IMPORTANT: The ribbon must not be twisted.

Connect the cruise control cable slug to the ribbon buckle.
Insert the cruise control cable into the cruise control module until the seal touches the module.

Fig 1: Connecting Cruise Control Cable
Courtesy of GENERAL MOTORS CORP.
Position the narrow cable tab into the narrow slot and the wide tab into the wide slot.

IMPORTANT: The adjuster tab must be pointing toward the front of the car after installation.

Fig 2: Connecting Cruise Control Cable To Cruise Control Module

Courtesy of GENERAL MOTORS CORP.

Connect the cruise control cable to the cruise control module by turning the cable clockwise.
Install the cruise control cable to the retainer clip on the engine.
Install the cruise control cable to the throttle body bracket pressing into place until fully seated.
Open the throttle body cam slightly.
Connect the cruise control cable to the throttle body cam lever.

Fig 3: View Of Cruise Control Cable At Throttle Body Cam Lever
Courtesy of GENERAL MOTORS CORP.