FixVault
Home › Pontiac › 2005 › Sunfire Automatic › Repair and Diagnosis › Engine Performance › System › Engine Controls - 2.2L - Introduction › Repair Instructions › Fuel Tank Pressure Sensor Replacement › Removal Procedure

Removal Procedure

  1. Remove the fuel tank. Refer to Fuel Tank Replacement .
    2. Fig 1: View Of Fuel Tank Pressure (FTP) Sensor Connector
    GM373185Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the fuel tank pressure (FTP) sensor connector.
    3. Fig 2: Identifying Fuel Tank Pressure (FTP) Sensor
    GM61928Courtesy of GENERAL MOTORS CORP.
  3. Remove the FTP sensor from the fuel sender.
About FixVault