FixVault
Home › Pontiac › 2005 › Sunfire Automatic › Repair and Diagnosis › Engine Performance › System › Engine Controls - 2.2L - Introduction › Repair Instructions › Intake Air Temperature (IAT) Sensor Replacement › Removal Procedure

Removal Procedure

  1. Disconnect the air cleaner duct from the air cleaner resonator.
    2. Fig 1: Locating IAT Sensor
    GM785335Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the IAT sensor harness connector.
  3. While twisting the IAT sensor (4), pull the sensor from the air cleaner resonator (1).
About FixVault