FixVault
Home › Pontiac › 2005 › Sunfire Automatic › Repair and Diagnosis › Steering › Steering Wheel & Steering Column › Repair Instructions › Multifunction, Turn Signal Switch Replacement › Installation Procedure

Installation Procedure

  1. Connect the electrical connectors to the multifunction switch (2).
    2. Fig 1: Exploded View Of Multifunction, Tilt Lever & Turn Signal Switch
    GM307332Courtesy of GENERAL MOTORS CORP.
  2. Install the multifunction switch (2) to the steering column while depressing the spring loaded horn pin.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the retaining screws to the multifunction switch (2).

    Tighten:  Tighten the screws to 4 N.m (36 lb in).

  4. Install the steering column trim covers. Refer to Steering Column Trim Covers Replacement .
  5. Connect the negative battery cable.
  6. Ensure that the multifunction switch functions properly.
About FixVault