FixVault
Home › Pontiac › 2005 › Sunfire Automatic › Repair and Diagnosis › Steering › Steering Wheel & Steering Column › Repair Instructions › Multifunction, Turn Signal Switch Replacement › Removal Procedure

Removal Procedure

    CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
  1. Disconnect the negative battery cable.
  2. Remove the steering column trim covers. Refer to Steering Column Trim Covers Replacement .
    3. Fig 1: Exploded View Of Multifunction, Tilt Lever & Turn Signal Switch
    GM307332Courtesy of GENERAL MOTORS CORP.
  3. Remove the retaining screws from the multifunction switch (2).
  4. Remove the multifunction switch (2) from the steering column.
  5. Disconnect the electrical connectors from the multifunction switch (2).
About FixVault