FixVault
Home › Pontiac › 2005 › Sunfire Automatic › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission - Introduction & Repair Instructions › Repair Instructions › Low/Reverse Servo Assembly Replacement › Installation Procedure

Installation Procedure

  1. Assemble the low and reverse servo. Refer to Low and Reverse Servo Assemble and Installation in Automatic Transaxle 4T40-E/4T45-E-Unit Repair.
    2. Fig 1: View Of Low/Reverse Servo Assembly
    GM588858Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the lo and the reverse band servo cover bolts.

    Tighten:  Tighten the bolts to 12 N.m (106 lb in).

  3. Install the oil feed pipe. Refer to Oil Feed Pipes Replacement .
About FixVault