FixVault
Home › Pontiac › 2005 › Vibe Base, FWD, Standard › Repair and Diagnosis › Engine Performance › System › Engine Control System - 1.8L (LV6) - Introduction › Repair Instructions › Accelerator Pedal Position (APP) Sensor Replacement (FWD) › Removal Procedure

Removal Procedure

    IMPORTANT: Do not remove the accelerator pedal position (APP) sensor from the accelerator pedal assembly. The APP sensor and pedal assembly are serviced as one unit.
    IMPORTANT: Do not attempt to adjust the APP sensor. The APP sensor calibration is preset at the factory.
    Fig 1: APP Sensor Electrical Connector
    GM1455347Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the electrical connector (2) from the APP sensor (1).
  2. Remove the 2 fasteners (3) and the APP sensor and pedal assembly (1).
About FixVault