FixVault
Home › Pontiac › 2005 › Vibe GT › Repair and Diagnosis › Engine Performance › System › Engine Control System - 1.8L (LNK) - Introduction › Repair Instructions › Rocker Arm Oil Control Solenoid Valve Replacement › Removal Procedure

Removal Procedure

    Fig 1: View Of Engine Upper Cover
    GM828878Courtesy of GENERAL MOTORS CORP.
  1. Remove the four fasteners from the engine cover (1).
  2. Remove the engine cover (1) from the engine.
    3. Fig 2: View Of PCV Hose, Breather Hose And EVAP Hose
    GM850214Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the PCV hose (1) from the PCV valve.
  4. Disconnect the PCV breather hose (2).
  5. Disconnect the EVAP hose (3).
  6. Swing the two PCV hoses and the EVAP hose away from the cylinder head.
    7. Fig 3: View Of Rocker Arm Oil Control Solenoid Valve And O-Ring
    GM828864Courtesy of GENERAL MOTORS CORP.
  7. Disconnect the electrical connector from the rocker arm oil control solenoid valve.
  8. Remove the fastener retaining the rocker arm oil control solenoid valve to the cylinder head.
  9. Remove the rocker arm oil control solenoid valve (1) and the O-ring (2) from the cylinder head.
About FixVault