FixVault
Home › Pontiac › 2005 › Vibe GT › Repair and Diagnosis › Engine Performance › System › Engine Control System - 1.8L (LNK) - Introduction › Repair Instructions › Secondary AIR Injection Pressure Sensor Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of Electrical Connector, Air Pressure Sensor And Shut Off Valve
    GM1467195Courtesy of GENERAL MOTORS CORP.
  1. Install the AIR pressure sensor (2) to the shut-off valve (3).
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Secure the AIR pressure sensor with 2 fasteners.

    Tighten:  Tighten the 2 fasteners to 5 N.m (44 lb in).

  3. Connect the electrical connector (1) to the AIR pressure sensor (2).
About FixVault