FixVault
Home › Pontiac › 2005 › Vibe GT › Repair and Diagnosis › Engine Performance › System › Engine Control System - 1.8L (LNK) - Introduction › Repair Instructions › Secondary AIR Injection Pressure Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: View Of Electrical Connector, Air Pressure Sensor And Shut Off Valve
    GM1467195Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the electrical connector (1) from the secondary air injection (AIR) pressure sensor (2).
  2. Remove the 2 fasteners of the AIR pressure sensor (2).
  3. Remove the AIR pressure sensor (2) from the shut-off valve (3).
About FixVault