FixVault
Home › Pontiac › 2005 › Vibe GT › Repair and Diagnosis › Engine Performance › System › Engine Control System - 1.8L (LNK) - Introduction › Repair Instructions › Throttle Position (TP) Sensor Replacement › Removal Procedure

Removal Procedure

NOTE: The TP sensor is an electrical component. Do not soak the TP sensor in any liquid cleaner or solvent as damage may result.
    Fig 1: View Of TP Sensor Components
    GM229615Courtesy of GENERAL MOTORS CORP.
  1. Remove the inlet air duct from between the air cleaner and throttle body.
  2. Remove the 2 fasteners (3) from the throttle position (TP) sensor (2).
  3. Remove the TP sensor (2) from the throttle body.
About FixVault