FixVault
Home › Pontiac › 2006 › G6 Base, 3.5 8 › Repair and Diagnosis › Engine Performance › System › Engine Control System - 3.5L - Introduction (2 Of 2) › Repair Instructions › Accelerator Controls Pedal Replacement › Removal Procedure

Removal Procedure

    Fig 1: Removing/Installing Accelerator Pedal Position Sensor
    GM1544734Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the accelerator pedal position (APP) sensor electrical connector.
  2. Remove the APP sensor bolts (1).
  3. Remove the APP sensor (2).
About FixVault