FixVault
Home › Pontiac › 2006 › G6 GTP, 2D Convertible › Repair and Diagnosis › Engine Performance › System › Engine Control System - 3.9L - DTC P0010 To DTC P0300 › DTC P0010 or P0011 › Component Testing › Dynamic Test

Dynamic Test

  1. Install fused jumper wire between the control and 12 volts. Install a jumper wire between the low reference and momentarily connect to ground.
  2. Point the CMP actuator solenoid towards a shop towel. Observe the operation of the solenoid immediately extends.
    • If the function does not perform as specified, replace the CMP actuator solenoid.
About FixVault