FixVault
Home › Pontiac › 2006 › GTO Automatic › Repair and Diagnosis › Accessories & Equipment › Cruise Control Systems › Repair Instructions › Cruise Release Switch Replacement › Installation Procedure

Installation Procedure

    Fig 1: Installing Cruise Control Release Switch Assembly
    GM1582876Courtesy of GENERAL MOTORS CORP.
  1. If removed, install the cruise release switch retaining clip (2) with the arrow pointing upward.
  2. Install the cruise release switch into the brake pedal support so the switch connectors face upwards.
  3. Adjust the cruise release switch. Refer to Cruise Release Switch Adjustment .
  4. Install the stop lamp switch. Refer to Stop Lamp Switch Replacement .
  5. Install the left ventilation ducts. Refer to Instrument Panel (I/P) Air Outlet Ducts Replacement .
  6. Install the left I/P lower insulator panel. Refer to Closeout/Insulator Panel Replacement - Left .
  7. Connect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .
About FixVault