FixVault
Home › Pontiac › 2006 › GTO Standard › Repair and Diagnosis › Body & Frame › Frames, Subframes & Crossmembers › Frame And Underbody › Repair Instructions › Engine Protection Shield Replacement › Removal Procedure

Removal Procedure

  1. Raise and support vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
    2. Fig 1: View Of Engine Protection Shield Bolts
    GM1302128Courtesy of GENERAL MOTORS CORP.
  2. Remove four engine protection shield bolts (1), then the engine protection shield.
About FixVault