FixVault
Home › Pontiac › 2006 › GTO Standard › Repair and Diagnosis › Engine Mechanical › Engine Mechanical - 6.0L › Repair Instructions › On-Vehicle Repair Instructions › Engine Oil Level Sensor and/or Switch Replacement › Installation Procedure

Installation Procedure

    NOTE: Refer to Fastener Notice .
  1. Install the drain plug.

    Tighten:  Tighten the drain plug to 25 N.m (18 lb ft).

  2. Install the engine oil level sensor.

    Tighten:  Tighten the drain plug to 20 N.m (15 lb ft).

  3. Reconnect the electrical connector.
  4. Lower the vehicle.
  5. Refill the engine. Refer to Capacities - Approximate Fluid .
About FixVault