Shock Module Replacement

Fig 1: Shock Module

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .Preliminary Procedure: Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation .
1	Bolt, Lower Shock Absorber Mounting (Qty: 2)
2	Nut, Lower Shock Absorber Retaining (Qty: 2) Tighten: 28 N.m (21 lb ft)
3	Nut, Upper Shock Absorber Mounting (Qty: 2) Tighten: 47 N.m (35 lb ft)
4	Module, Shock Tip: To remove the spring, refer to Shock, Shock Component, and/or Spring Replacement . If disposing the shock absorber, refer to Suspension Shock/Strut Disposal .