Shift Control Knob Replacement
Shift Control Knob Replacement
| Callout | Component Name |
|---|---|
|
NOTE:
Refer to Fastener Notice
in Cautions and Notices. Fastener Tightening Specifications:
Refer to Fastener Tightening Specifications . |
|
| 1 | Ring, shift control lever boot. Tip: Release the control boot ring from the instrument cluster trim panel. |
| 2 | Screw, shift control lever. Tighten: 10 N.m (89 lb in). Tip: Ensure the screw is lined up with the flat on the control lever before tightening. |
| 3 | Knob, shift control lever. Tip: The shift control knob and boot must be replaced as an assembly. |