FixVault

Installation Procedure

    Fig 1: Removing/Installing Front Console Trim Panels
    GM1152095Courtesy of GENERAL MOTORS CORP.
  1. Position the left console trim panel.
  2. Install the push-in fastener.
  3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the screws to the left console trim panel.

    Tighten:  Tighten the screws to 2.5 N.m (22 lb in).

  5. Fig 2: View Of Center Trim Plate
    GM1347013Courtesy of GENERAL MOTORS CORP.
  6. Position the center trim plate to the front console.
  7. Push until the trim clips engage.
  8. Fig 3: View Of Center Console Trim Bezel
    GM1344259Courtesy of GENERAL MOTORS CORP.
  9. Install the center trim panel.
  10. Position the front seat forward to the original position.