FixVault
Home › Pontiac › 2006 › Vibe Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 17 (Stationary Window System) › Repair Instructions › Windshield Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Replacing Upper Windshield Stoppers
    GM867289Courtesy of GENERAL MOTORS CORP.
  1. Replace the upper windshield stoppers (1) and (2).
  2. Install a stationary window into the opening. Refer to Urethane Adhesive Installation of Stationary Windows .
  3. Install the air inlet grille. Refer to Air Inlet Grille Panel Replacement in Body Front End.
  4. Install the windshield wiper arms. Refer to Wiper Arm Replacement in Wipers/Washer Systems.
  5. Close the hood.
  6. Install the rearview mirror. Refer to Rearview Mirror Replacement .
    7. Fig 2: Removing/Installing Windshield Side Garnish Molding
    GM241992Courtesy of GENERAL MOTORS CORP.
  7. Install the windshield side garnish moldings (1). Refer to Garnish Molding Replacement - Windshield Pillar in Interior Trim.
  8. Remove the double layer of masking tape from around the perimeter of the painted surfaces and the interior trim.
  9. Close the door.
About FixVault