FixVault
Home › Pontiac › 2007 › G5 GT, Standard › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - 2.4L - Introduction (2 Of 2) › Repair Instructions › Mass Airflow Sensor/Intake Air Temperature Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: View Of MAF/IAT Sensor Engine Harness Electrical Connector
    GM1647998Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the engine harness electrical connector from the mass air flow (MAF)/intake air temperature (IAT) sensor.
    2. Fig 2: View Of MAF/IAT Sensor
    GM1656943Courtesy of GENERAL MOTORS CORP.
  2. Remove the MAF/IAT sensor screws.
  3. Remove the MAF/IAT sensor.
About FixVault