FixVault
Home › Pontiac › 2007 › G6 Base, 2.4 B › Repair and Diagnosis › Engine Performance › System › Engine Control System & Fuel System - 2.4L - Introduction (2 Of 2) › Repair Instructions › Fuel Injector Replacement › Installation Procedure

Installation Procedure

    Fig 1: Identifying Fuel Injector & Components
    GM1683403Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: The fuel injector assembly is stamped with a part number identification. Be sure to use the correct part number when ordering replacement fuel injectors.
  1. Lubricate the NEW fuel injector O-rings with clean engine oil.
  2. Install the NEW fuel injector upper O-ring (2).
  3. Install the NEW fuel injector lower O-ring (4).
  4. Install the fuel injector (3) to the fuel rail.
  5. Install the fuel injector retainer (1).
  6. Install the fuel rail. Refer to Fuel Rail Assembly Replacement .
About FixVault