FixVault
Home › Pontiac › 2007 › G6 Base, 2.4 B › Repair and Diagnosis › Engine Performance › System › Engine Control System & Fuel System - 2.4L - Diagnosis & Troubleshooting › Service Bay Test › Test Procedure

Test Procedure

IMPORTANT: If the Service Bay Test aborts or fails a DTC will NOT be set.
  1. Install a scan tool.
  2. Select the Service Bay Test with the scan tool.
    CAUTION: Refer to Road Test Caution .
  3. Follow the instructions on the scan tool.
    • If the test aborts, correct the condition for running the test and then retest.
    • If the test fails, repair the vehicle for the condition indicated by the failure message on the scan tool.
  4. Verify that the EVAP I/M system status is set to YES.
About FixVault