FixVault
Home › Pontiac › 2007 › G6 Base, 2.4 B › Repair and Diagnosis › External Pages › Different car › Section 1848 (Data Communication System) › Repair Instructions › Body Control Module Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel (I/P) compartment. Refer to Instrument Panel Compartment Replacement .
    2. Fig 1: Body Control Module, Bracket & Electrical Connectors
    GM1466495Courtesy of GENERAL MOTORS CORP.
  2. Remove the screws securing the body control module to the module bracket.
  3. Disconnect the electrical connectors.
About FixVault