FixVault
Home › Pontiac › 2007 › G6 Base, 3.5 N › Repair and Diagnosis › Engine Performance › System › Engine Control System & Fuel System - 3.5L - Introduction (2 Of 2) › Repair Instructions › Manifold Absolute Pressure Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: View Of MAP Sensor
    GM1239001Courtesy of GENERAL MOTORS CORP.
  1. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement .
  2. Disconnect the manifold absolute pressure (MAP) sensor electrical connector.
  3. Remove the MAP sensor attaching screw.
  4. Remove the MAP sensor and MAP sensor seal from the upper intake manifold.
About FixVault