FixVault
Home › Pontiac › 2007 › G6 Base, 3.5 N › Repair and Diagnosis › Engine Performance › System › Engine Control System & Fuel System - 3.5L - Introduction (2 Of 2) › Repair Instructions › Spark Plug Wire Replacement › Installation Procedure

Installation Procedure

    Fig 1: Identifying Spark Plug Wires To Ignition Coils
    GM1299209Courtesy of GENERAL MOTORS CORP.
  1. Install the spark plug wires (1-6) to the engine.
  2. Install the spark plug wires to the ignition coils.
    3. Fig 2: Identifying Spark Plug Wires On Engine Right Side
    GM1299397Courtesy of GENERAL MOTORS CORP.
  3. Install the spark plug wires (1, 3, and 5) to the engine right side spark plugs.
  4. Install the spark plug wires to the retaining clip.
    5. Fig 3: Identifying Spark Plug Wires On Engine Left Side
    GM1299208Courtesy of GENERAL MOTORS CORP.
  5. Install the spark plug wires (2, 4, and 6) to the engine left side spark plugs.
  6. Install the spark plug wires to the retaining clips.
  7. Install the intake manifold cover. Refer to Intake Manifold Cover Replacement .
About FixVault