FixVault
Home › Pontiac › 2007 › Grand Prix Base › Repair and Diagnosis › Electrical › Charging Systems › Battery, Charging System And Starting System › Repair Instructions › Generator Brace Replacement (L32) › Installation Procedure

Installation Procedure

    Fig 1: Generator Brace, Nut & Bolt
    GM338389Courtesy of GENERAL MOTORS CORP.
  1. Install the generator rear brace.
  2. Install the generator rear brace bolt (1).
  3. Install the generator rear brace nut (2).
    4. NOTE: Refer to Fastener Notice .
  4. Tighten the generator bolts in the order described. The following is a mandatory torque sequence:

    Tighten: 

    1. Tighten the generator rear brace bolt (1) to 50 N.m (37 lb ft).
    2. Tighten the generator rear brace nut (2) to 50 N.m (37 lb ft).

  5. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement (L26) or Fuel Injector Sight Shield Replacement (L32) Engine Mechanical - 3.8L.
About FixVault