FixVault
Home › Pontiac › 2007 › Grand Prix Base › Repair and Diagnosis › External Pages › Different car › Section 144 (Immobilizer System) › Repair Instructions › Theft Deterrent Module Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Theft Deterrent Control Module
    GM884916Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to SIR Caution .
  1. Disable the inflatable restraint steering wheel module. Refer to SIR Disabling and Enabling .
  2. Remove the upper and lower trim covers. Refer to Steering Column Trim Covers Replacement .
  3. Remove the lock cylinder. Refer to Ignition Lock Cylinder Replacement .
  4. Disconnect the connector from the theft deterrent module.
  5. If necessary, disconnect the connector from the ignition lock cylinder case.
  6. Remove the theft deterrent module from ignition lock cylinder case assembly.
About FixVault