FixVault
Home › Pontiac › 2007 › Grand Prix Base › Repair and Diagnosis › External Pages › Different car › Section 76 (Theft Deterrent System) › Repair Instructions › Theft Deterrent Module Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Buick LaCrosse and 2007 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Theft Deterrent Control Module
    GM884916Courtesy of GENERAL MOTORS CORP.
  1. Install the theft deterrent module onto the ignition lock cylinder case assembly.
    2. CAUTION: Refer to SIR Inflator Module Coil Caution .
  2. Connect the connector to the theft deterrent module.
  3. If necessary, connect the connector to the ignition lock cylinder case.
  4. Install the lock cylinder. Refer to Ignition Lock Cylinder Replacement in Steering Wheel and Column.
  5. Install the upper and lower trim covers. Refer to Steering Column Trim Covers Replacement in Steering Wheel and Column.
  6. Enable the inflatable restraint steering wheel module. Refer to SIR Disabling and Enabling in SIR.
About FixVault