FixVault
Home › Pontiac › 2007 › Grand Prix Base › Repair and Diagnosis › Restraints › Air Bag, SRS › Supplemental Inflatable Restraint System › Repair Instructions › Inflatable Restraint Steering Wheel Module Replacement › Installation Procedure

Installation Procedure

    Fig 1: View of CPA, Horn Grounded Lead, & Inflatable Restraint Steering Wheel Module
    GM709895Courtesy of GENERAL MOTORS CORP.
  1. Connect the horn ground lead (2) into the lower left threaded hole in the steering wheel.
  2. Connect the horn contact lead into the steering column cam tower.
  3. Rotate the horn contact turn 1/4 turn clockwise to lock.
  4. Connect the inflator module electrical connectors and CPA (4).
    IMPORTANT: Route the driver inflator wires, the redundant control wires, and the horn wires correctly.
  5. Align the driver inflator module fasteners to the steering column fastener holes.
  6. Push the driver inflator module firmly into the steering column to engage the fasteners.
  7. Enable the SIR system. Refer to SIR Disabling and Enabling .
About FixVault