FixVault
Home › Pontiac › 2007 › Solstice Base, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Controls & Fuel - 2.4L - Introduction (2 Of 2) › Repair Instructions › Accelerator Pedal Position Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: APP Sensor Electrical Connector
    GM1593852Courtesy of GENERAL MOTORS CORP.
  1. Remove the knee bolster. Refer to Knee Bolster Replacement .
  2. Disconnect the accelerator pedal position (APP) sensor electrical connector.
    3. Fig 2: APP Sensor
    GM1593853Courtesy of GENERAL MOTORS CORP.
  3. Remove the APP sensor nuts.
  4. Remove the APP sensor from the vehicle.
About FixVault