FixVault
Home › Pontiac › 2007 › Solstice Base, Standard › Repair and Diagnosis › Engine Performance › System › Engine Controls & Fuel - 2.4L - Introduction (2 Of 2) › Repair Instructions › Engine Coolant Temperature Sensor Replacement › Installation Procedure

Installation Procedure

    Fig 1: ECT Sensor
    GM1713085Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  1. Install the ECT.

    Tighten:  Tighten the sensor to 20 N.m (15 lb ft).

    2. Fig 2: ECT Sensor Electrical Connector
    GM1591858Courtesy of GENERAL MOTORS CORP.
  2. Connect the engine wiring harness electrical connector (6) to the ECT sensor.
  3. Fill the cooling system as needed. Refer to Draining and Filling Cooling System (GE-47716) or Draining and Filling Cooling System (2.4L LE5 Only) .
About FixVault